$15 Off On Order Over $100 Promo Code SAVE15
HOT SEARCH

Replacement Filter For:

GE PSS27SHNABS

  • Filter Features
  • Filter Life: 6 Months

  • Filter Capacity: 300 Gallons

  • Filter Type: Generic

  • Taste

  • Odors

  • Chlorine

  • Largest Selection:
  • Bring GE refrigerator water filter to replace the inefficient Waterfall WFC1201,Water Sentinel WSG 1,Water Filter Tree WLF GE01 in your pss27shnabs from Clatterans. GE pss27shnabs Waterfall WFC1201,Water Sentinel WSG 1,Water Filter Tree WLF GE01 is recommended to be changed every three or six months to do its best filtration result but depending on the water source and how many times you use. The filter replacement is tested and certified to IAPMO and NSF/ANSI standard 42 for the reduction of most contaminants and substances including chlorine, lead, mercury and thallium. Install the Waterfall WFC1201,Water Sentinel WSG 1,Water Filter Tree WLF GE01 is much easier and without tools needed. Savor healthy life from Clatterans.   

Compatibility

GE Refrigerator Models

How to replace your filter

REMOVE
1. Locate your existing filter. Remove the old filter from the filter mount by turning it counterclockwise as shown in the picture.
        
PREPARE
2. Carefully remove the plug on top of the new filter (twisting it back and forth eases the plug out). Be careful not to remove the o-ring located under the plug.
 
3. Check that the o-ring is seated evenly on top of the filter. The o-ring is required for a proper seal to the filter mount.
 
4. Your new filter is designed slightly different from the original filter it replaces. It has a notch on the top edge (see picture) and the o-ring inside the top. When the filter is placed in the filter mount it may require more effort to turn the filter because of the o-ring.
        
INSTALL
5. Place the top of the new filter into the refrigerator filter mount. Be sure that the START arrow on the filter label is aligned with arrow on the filter mount.
 
6. Twist the filter clockwise until the STOP arrow on the label is aligned with the arrow on the mount. The arrows must be aligned to activate the water valve located inside the filter mount.If the valve is not fully activated the water flow will be slower than normal. In some instances the partially activated valve may cause a "chattering" noise in the water line.
 
7. Check the water flow by filling a glass from the refrigerator water dispenser. If the water flow is slow or there is"chattering remove and reinstall the filter making sure it is seated securely and the arrows are aligned. Check again.
NOTE: Initial flow rate may be slower than expected
Full flow rate should be restored within 24-36 hours.
        
FLUSH
8. Run water from the dispenser for 5 minutes at .5 gpm (about 2% gallons) to clear the system and prevent sputtering.
 
9. Check the filter for any leaks. Inspect the mount area and filter bottom for any sign of moisture.
        
COMPLETE
10.Reset the "replace filter" light if needed, by holding the reset button for three seconds.
 
11. Attach the included date label according to label instructions.
 
12. Replace filter every six months for best results.
 

Customer Review

RATING

4.8

OUT OF 5

TOTAL REVIEWS

108

SATISFACTION

96%

Top customer reviews

  • Excellent price for replacement filters

    By Jon Klopchin on 2021-04-04 11:26:09

    Great way to replace my water filters and the price for three was cheaper than buying one locally. Thank you

  • Good as OEM

    By Martin on 2021-03-29 11:40:17

    Product fit just like the original. So far water tastes the same.

  • Save Money, Get These.

    By Sam Bland on 2021-03-04 08:33:32

    Great work. Will keep coming back. Excellent quality filter.

  • Great product

    By Mark on 2021-02-16 10:33:35

    It was very easy to install. It fits right in! I'll definitely be buying more next year as these are good for 6 months.

  • Highly recommend

    By Elizabeth Sando on 2021-02-12 09:30:09

    It works and fits perfectly. I'm so happy to find it.

  • Easy to install and great taste

    By Rebecca on 2021-01-19 08:29:14

    After receiving the product and installing it, I have to say the quality of the water is good. I would recommend this product and seller.

< >

    FAQ

    How often should you replace your water filter?
     
    - On average, most filters last 6 months or 300 gallons depending on your water quality and usage.
     
    How do I turn off my filter light to reset?
     
    - If the filter light will not reset after following specific instructions from your owner manual, contact your refrigerator manufacturer.
     
    Do the gaskets (o-rings) on the filters need to be lubricated?
     
    - Most water filters come with pre-lubricated O-rings
     
    - If you are having trouble installing the filter, we have found that a small amount of vegetable oil applied to the O-ring will ease installation and removal of the filter.
     
    I just installed my filter; do I need to run water through it before I drink the water? If so, how much?
     
    - You should run 3 gallons of water through your filter in order to flush it and make sure that it is thoroughly wet. Do not run the 3 gallons continuously, instead run the water for a few minutes and stop in between. Get a gallon water container, and pour and refill 3 times!
    Live Customer Support
     
    Our hours of operation are Monday thru Friday from 8:00am to 6:00pm Eastern Time and our after hours sales team is available 24 hours a day, 7 days a week. Whether it’s placing an order or answering questions that may help in your purchasing decisions, our specialists are ready to assist you. You can also contact us via email.
     

Find your refrigerator water filter in a few easy steps

What Brand Of Refrigerator Do You Have