$15 Off On Order Over $100 Promo Code SAVE15
HOT SEARCH

Replacement Filter For:

Kenmore 242069601

  • Filter Features
  • Filter Life: 6 Months

  • Filter Capacity: 400 Gallons

  • Filter Type: Generic

  • The Kenmore 242069601 replacement at Clatterans is the compatible replacement refrigerator water filter for many Kenmore refrigerator models. This Kenmore 242069601 is IAPMO Certified and meets NSF/ANSI standards 42. The 242069601 filter creates better tasting water for drinking and making beverages as well as clean, clearer, healthy ice. The Kenmore 242069601 replacement can help reduce those impurities by filtering them out with what we call activated carbon. The carbon contains a porous material that absorbs potentially harmful contaminants, leaving you with clean, clear, better tasting water and ice for you and your family.  So you can feel reassured that you and your family are getting the most out of your water. Clatterans recommends replacing the Kenmore fridge water filter every 6 months to maximize the reduction of contaminants.
     

Compatibility

How to replace your filter

1. Locate the filter below the refrigerator. Slowly turn the cartridge a 1/4 of a turn counter-clockwise and remove. Remove the knob from the former filter.

2. Remove all packaging, and the protective cap from the new filter.

3. Slide the knob from the former filter onto the new filter. Insert the new filter into the refrigerator and turn clockwise until fully seated.

4. Run water from the dispenser for 5 minutes (approximately 3 gallons) to clear the system and prevent air from entering the system
NOTE: The initial flow rate may be slower than expected. Full flow rate should be restored within 24-36 hour

5. Press the light switch (the one that the refrigerator door presses every time you close the door) 5 times within 10 seconds, or if the refrigerator has a filter button, press and hold that button for 5-10 seconds

6. Locate the included Water Filter Replacement Calendar and follow the instructions on the labe

Customer Review

RATING

0

OUT OF 5

TOTAL REVIEWS

0

SATISFACTION

0%

Top customer reviews

< >

    FAQ

    How often should you replace your water filter?

    - On average, most filters last 6 months or 300 gallons depending on your water quality and usage.

    How do I turn off my filter light to reset?

    - If the filter light will not reset after following specific instructions from your owner manual, contact your refrigerator manufacturer.

    Do the gaskets (o-rings) on the filters need to be lubricated?

    - Most water filters come with pre-lubricated O-rings

    - If you are having trouble installing the filter, we have found that a small amount of vegetable oil applied to the O-ring will ease installation and removal of the filter.

    I just installed my filter; do I need to run water through it before I drink the water? If so, how much?

    - You should run 3 gallons of water through your filter in order to flush it and make sure that it is thoroughly wet. Do not run the 3 gallons continuously, instead run the water for a few minutes and stop in between. Get a gallon water container, and pour and refill 3 times!
    Live Customer Support
    Our hours of operation are Monday thru Friday from 8:00am to 6:00pm Eastern Time and our after hours sales team is available 24 hours a day, 7 days a week. Whether it’s placing an order or answering questions that may help in your purchasing decisions, our specialists are ready to assist you. You can also contact us via email.

Find your refrigerator water filter in a few easy steps

What Brand Of Refrigerator Do You Have